GlueMFG super glue is ethyl 2-cyanoacrylate (90–100%) with polymethyl methacrylate (0–10%). It is GHS-classified as a Category 4 flammable liquid and a Category 2 skin and eye irritant, with signal word Warning. Its closed-cup flash point is 91.0 °C, so it is not a restricted dangerous good under RID/ADR, IATA DGR, or the IMO IMDG Code — it ships as general cargo. Handle with gloves and eye protection, store cool and tightly closed, and keep it away from water, amines, and alcohols.
This page reproduces the safety data sheet content for the super glue we supply, in the GHS 16-section order that customs brokers, EHS teams, and Amazon or retail compliance reviewers expect. It is the same data set as the stamped PDF originals, published in a readable format so a buyer can check the classification before requesting documents.
SDS number 262670101448 · Effective date 2026-01-01 · Revision 0 · Prepared by Shanghai Institute of Chemical Industry Testing Co., Ltd. (CNAS IB0071), Tel/Fax +86-21-52815377 / 31765555. Reference standard: Globally Harmonized System of Classification and Labelling of Chemicals (GHS), eleventh revised edition. Stamped English and Chinese originals are issued in the name of our manufacturing partner and are supplied on request.
Section 1 — Product and Company Identification
| Product name | SUPER GLUE, POWER GLUE, ADHESIVE |
| Supplier | GlueMFG — Yiwu, Zhejiang, China |
| info@gluemfg.com | |
| Recommended use and restrictions | Industrial use. Not edible. Keep away from children. Wash with clean water after contact with skin. |
| SDS number | 262670101448 |
| Effective date | 2026-01-01 |
Section 2 — Hazards Identification
GHS classification
| Physical hazards | Flammable liquids, Category 4 |
| Health hazards | Skin corrosion/irritation, Category 2 Serious eye damage/eye irritation, Category 2 Specific target organ toxicity — single exposure, Category 3 (respiratory tract irritation) |
| Environmental hazards | Classification not possible |
Hazards not mentioned above are either not applicable or no data is available.
Hazard statements
- H227Combustible liquid.
- H315Causes skin irritation.
- H319Causes serious eye irritation.
- H335May cause respiratory irritation.
Prevention
- P210Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P280Wear protective gloves / protective clothing / eye protection / face protection / hearing protection.
- P264+P265Wash hands thoroughly after handling. Do not touch eyes.
- P261Avoid breathing dust / fume / gas / mist / vapours / spray.
- P271Use only outdoors or with adequate ventilation.
Response
- P370+P378In case of fire: use dry chemical, water spray or suitable foam to extinguish.
- P302+P352If ON SKIN: wash with plenty of water.
- P332+P317If skin irritation occurs: get medical help.
- P362+P364Take off contaminated clothing and wash it before reuse.
- P305+P351+P338If IN EYES: rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P337+P317If eye irritation persists: get medical help.
- P304+P340If INHALED: remove person to fresh air and keep comfortable for breathing.
- P319Get medical help if you feel unwell.
Storage and disposal
- P403+P233Store in a well-ventilated place. Keep container tightly closed.
- P405Store locked up.
- P501Dispose of contents / container in accordance with local, regional, national, and/or international regulations.
Other hazards: no data available.
Section 3 — Information on Ingredients
Substance / mixture: Mixture.
| Ingredient | Concentration (%) | CAS No. | EC No. |
|---|---|---|---|
| Ethyl 2-cyanoacrylate | 90–100 | 7085-85-0 | 230-391-5 |
| Polymethyl methacrylate | 0–10 | 9011-14-7 | 618-466-4 |
Section 4 — First-Aid Measures
| Skin exposure | In case of skin contact, flush with copious amounts of water. If irritation persists, call a physician. |
| Eye exposure | In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. If irritation persists, call a physician. |
| Inhalation exposure | If inhaled, remove to fresh air immediately. If the person feels unwell, call a physician. |
| Oral exposure | If swallowed, wash out mouth with water provided the person is conscious. Call a physician. |
| Most important symptoms / effects, acute and delayed | No data available. |
| Immediate medical attention and special treatment | No data available. |
Section 5 — Fire-Fighting Measures
| Suitable extinguishing media | Dry chemical, water spray or suitable foam. |
| Specific hazards arising from the chemical | Combustible liquid. Take care as it may decompose upon combustion or at high temperatures to generate carbon oxides. |
| Special protective action for fire-fighters | Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Fire-extinguishing work is done from the windward side. Uninvolved persons should evacuate to a safe place. |
Section 6 — Accidental Release Measures
| Personal precautions, protective equipment and emergency procedures | Use personal protective equipment. Remove all sources of ignition. Avoid inhalation. Keep people away from and upwind of the spill or leak. Ensure adequate ventilation. Entry of non-involved personnel should be controlled around the leakage area by roping off. |
| Environmental precautions | Prevent further leakage or spillage if safe to do so. Avoid entering drains. |
| Containment and cleaning up | Mix with inert material (e.g. dry sand, vermiculite) and transfer to a dry, clean, lidded container for disposal. Avoid inhalation. Ventilate the area and wash the spill site after material pickup is complete. |
Section 7 — Handling and Storage
Precautions for safe handling. Operators should be trained and strictly abide by operating procedures. Wear appropriate protective clothing and gloves (see Section 8). Avoid inhalation. Avoid contact with eyes and skin. Handle in a well-ventilated place. Keep away from ignition sources, heat and flame. No smoking at the working site. Take measures to prevent electrostatic discharge — electrostatic charges may be generated during pumping, so ensure electrical continuity by bonding all equipment. Avoid contact with incompatible materials (see Section 10). Wash hands and face thoroughly after handling. Load and unload gently. Prevent the package from breaking and getting damp so as to cause losses. The working place should be equipped with appropriate varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment.
Conditions for safe storage, including incompatibilities. Store in a cool place. Keep the container tightly closed in a dry and well-ventilated place. Keep away from ignition sources, heat and flame. Store separately from incompatible materials (see Section 10). The storage place should be equipped with appropriate varieties and quantities of fire-fighting equipment and leakage emergency treatment equipment.
Section 8 — Exposure Control / Personal Protection
| Control parameters | GBZ 2.1-2019 Occupational Exposure Limits for Hazardous Agents in the Workplace, Part 1: not set up. ACGIH — Ethyl 2-cyanoacrylate: TLV-TWA 0.2 ppm (1 mg/m³), TLV-STEL 1 ppm (5.1 mg/m³). Remarks: RSEN; DSEN. |
| Appropriate engineering controls | Mechanical exhaust required. Safety shower and eye bath. |
| Eye / face protection | Wear chemical safety glasses. |
| Skin protection | Hand protection: wear anti-static gloves. Body protection: wear anti-static clothing. |
| Respiratory protection | Wear a government-approved respirator. |
| Thermal hazards | No data available. |
| Other protection | No smoking, drinking or eating at the working site. Wash thoroughly after handling. |
Section 9 — Physical and Chemical Properties
| Appearance | Colorless transparent viscous liquid |
| Odor | Weak odor |
| pH value | No data available |
| Solubility | Curing occurs by reacting with water |
| Melting point / freezing point | No data available |
| Boiling point, initial boiling point and boiling range | No data available |
| Flash point (closed cup) | = 91.0 °C |
| Density / relative density | No data available |
| Kinematic viscosity | No data available |
| Upper / lower flammability or explosive limits | No data available |
| Vapour pressure | No data available |
| Relative vapor density | No data available |
| Partition coefficient n-octanol/water (log value) | No data available |
| Autoignition temperature | No data available |
| Decomposition temperature | No data available |
| Particle characteristics | Not applicable |
| Flammability (solid, gas) | Not applicable |
Section 10 — Stability and Reactivity
| Reactivity | No data available. |
| Chemical stability | Stable under normal temperatures and pressures. |
| Possibility of hazardous reactions | No data available. |
| Conditions to avoid | No data available. |
| Incompatible materials | Reducing agents, water, amines, alcohols, alkali metals, oxidizing agents, combustible materials. |
| Hazardous decomposition products | Carbon oxides. |
Section 11 — Toxicological Information
| Acute toxicity | No data available. |
| Skin corrosion / irritation | Causes skin irritation. |
| Serious eye damage / irritation | Causes serious eye irritation. |
| Respiratory sensitization | No data available. |
| Skin sensitization | No data available. |
| Germ cell mutagenicity | No data available. |
| Carcinogenicity | No data available. |
| Reproductive toxicity | No data available. |
| STOT — single exposure | May cause respiratory irritation. |
| STOT — repeated exposure | No data available. |
| Aspiration hazard | No data available. |
Section 12 — Ecological Information
| Toxicity | No data available. |
| Persistence and degradability | No data available. |
| Bioaccumulative potential | No data available. |
| Mobility in soil | No data available. |
| Other adverse effects | No data available. |
Section 13 — Disposal Considerations
Recycle as far as possible. If unable to recycle, it is recommended to use the incineration method for disposal under supervision. This product should not be disposed of by discharge into sewers. Return empty containers to the manufacturer or dispose of them in accordance with national and local regulations. Follow the relevant provisions of national and local regulations before disposal. It is recommended to be disposed of by a qualified chemical waste treatment department.
Section 14 — Transport Information
| RID/ADR (2025 edition) | The product is not subject to RID/ADR. |
| IATA DGR (67th edition) | The product is not subject to IATA DGR. |
| IMO IMDG Code (2024 edition) | The product is not subject to the IMO IMDG Code. |
| Environmental hazards | No |
| Special precautions for user | No data available. |
| Transport in bulk according to IMO instruments | Not applicable |
No UN number, no packing group, no dangerous-goods declaration, and no hazmat surcharge for sea, air, road, or rail. For the separate CNAS-accredited sea-freight test report behind this conclusion, see our super glue sea freight hazard classification report.
Section 15 — Regulatory Information
| Montreal Protocol | Not listed. |
| Stockholm Convention | Not listed. |
| Rotterdam Convention | Not listed. |
| EINECS / ELINCS | Ethyl 2-cyanoacrylate in the product is listed. |
| TSCA | Both ingredients in the product are listed. |
| IECSC | Both ingredients in the product are listed. |
Section 16 — Other Information
| Preparation date | 2026-01-01 |
| Preparation department | Shanghai Institute of Chemical Industry Testing Co., Ltd. · Tel/Fax: +86-21-52815377 / 31765555 |
| Revision | 0 |
| Reference standard | Globally Harmonized System of Classification and Labelling of Chemicals (GHS), eleventh revised edition |
Abbreviations and acronyms
CAS: Chemical Abstracts Service. EC: European Commission. ACGIH: American Conference of Governmental Industrial Hygienists. RID: Regulations concerning the International Carriage of Dangerous Goods by Rail. ADR: Agreement concerning the International Carriage of Dangerous Goods by Road. IATA DGR: International Air Transport Association Dangerous Goods Regulations. IMO IMDG Code: International Maritime Organization International Maritime Dangerous Goods Code. MARPOL: International Convention for the Prevention of Pollution from Ships. IBC Code: International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk. EINECS: European Inventory of Existing Commercial Chemical Substances. ELINCS: European List of Notified Chemical Substances. TSCA: Toxic Substances Control Act. IECSC: Inventory of Existing Chemical Substances in China. TLV-TWA: threshold limit value — time weighted average. TLV-STEL: threshold limit value — short term exposure limit. DSEN: may cause dermal sensitization. RSEN: may cause respiratory sensitization.
This SDS is compiled based on information such as ingredients provided by the applicant and the current knowledge of the issuing laboratory. It shall be used only as a guide. Users must make independent judgments on its correctness and completeness and then decide its suitability according to the actual situation, and should take the relevant legal responsibilities for the consequences of use. Formulations vary between production runs — confirm the current SDS against your specific order before filing it with customs or a marketplace.
Related GlueMFG Pages
The Chinese-language version of this document is published at Super Glue SDS — Chinese version. For the transport test report, see the sea freight hazard classification report. To browse the products this SDS covers, see the GlueMFG product catalog, or return to the GlueMFG homepage for OEM packaging and export support.
FAQ
Is super glue classified as a dangerous good for shipping?
No. Under Section 14 of this SDS, ethyl cyanoacrylate super glue is not subject to RID/ADR (2025 edition), IATA DGR (67th edition), or the IMO IMDG Code (2024 edition). The closed-cup flash point is 91.0 °C, well above the 60 °C threshold for Class 3 flammable liquids, so it moves as general cargo by sea, air, road, and rail.
Why is the product still GHS-classified as a flammable liquid if it is not a dangerous good?
GHS Category 4 flammable liquid (H227 Combustible liquid) covers flash points between 60 °C and 93 °C. That category triggers workplace labelling and the P210 keep-away-from-heat precaution, but it sits outside the transport dangerous-goods classes, which only start at Class 3 (flash point below 60 °C). Both statements are correct at the same time.
What are the actual ingredients in the super glue covered by this SDS?
Ethyl 2-cyanoacrylate at 90–100% (CAS 7085-85-0, EC 230-391-5) and polymethyl methacrylate at 0–10% (CAS 9011-14-7, EC 618-466-4). Both are listed on TSCA and IECSC; ethyl 2-cyanoacrylate is listed on EINECS/ELINCS.
What first aid applies if super glue bonds skin or contacts eyes?
For skin contact, flush with copious amounts of water and call a physician if irritation persists. For eye contact, flush with copious water for at least 15 minutes, holding the eyelids apart with your fingers, then get medical help. Do not attempt to pull bonded skin or eyelids apart by force.
How do I get the stamped original SDS for customs or a compliance file?
The stamped English and Chinese originals — issued by Shanghai Institute of Chemical Industry Testing Co., Ltd. (CNAS IB0071) under report number 262670101448 — are available on request with your order or sample shipment. Email info@gluemfg.com with your company name and destination market.